Grass Edger from Lakeland – Product Review

Review by Michael Smith

Grass Edger – Lakeland Ref 50965 – 21.96 GBP

This Grass Edger sold by Lakeland comes as a 2-part tube steel construction that is assembled by means of a bolt with a wing nut. The assembly cause no problems whatsoever as it was all too obvious and the device appears to be quite sturdy.

The circular cutter of the Grass Edger is not over sharp – but is probably intended to be in is way – and the cutter assembly too looks fairly robust as well. Obviously, as will all things, the proof of the pudding, as they say, is in the eating, meaning here that only over a more prolonged use would one be able to gauge how it performs and holds up to the rigors that some may inflict it the tool.

The operation of the Grass Edger is straight forward and it cuts the edge very well, even rather matted grass, as was the case with the overgrown edges at my garden areas, some about a quarter of an inch thick. I know, shame on me for letting it get that way.

Read more here

Bulldog Ratchet Pruning Shears BD31303 – Product Review

20mm cutting diameter ratchet pruning shears

Review by Michael Smith

I have to say that this is the first of those kinds of pruning shears that I ever really have had an opportunity to use and review.

Other manufacturers and vendors for some reason have been more than reluctant, to say the least, to part with one of those for a proper and thorough product review and I leave the reader to draw his or her own conclusions as to the why and wherefore of this.

Bulldog's representatives on IOG Saltex 2008 were more than happy to supply me with one of those and so far I must say that I am quite impressed with this tool.

It took a little while for me to get the proper hang of it as to the best way of using it but once that had been mastered it is just a great piece of kit.

The maximum cutting size, in my opinion, should not be exceeded when cutting hardwoods, whether green or not, such as apply, plum, oak, etc. While it may work alright with slightly larger branch diameters, I must say that I would not recommend doing it.

Once the “trick” of properly using the ratchet is mastered this pair of pruners cuts through quite thick branches without any real effort. Small pruning is best done with the topmost tip of the pruners as it is then just the single snip. This is very good for dead heading of roses and also general small pruning rather than using the cutting jaws further down that then still employs the ratchet, making the cutting process a little slower.

On larger material the ratchet makes cutting virtually effortless and I recently used it to cut back a Willow (Salix) and in this instance cutting material with diameters of 35mm and such without any problems. It must be considered thought that green willow is a rather soft wood.

I also used it to prune some apple trees and in that case I restricted myself to about the maximum given diameter for this pair of pruners and there as well very little effort and strength was needed for the cutting.

From what I have seen so far as to the performance and reliability I can, I think, very much recommend this model of Bulldog's pruners without any hesitation.

Once again another piece of kit that is of fine quality at a very reasonable price.

© M Smith (Veshengro), October 2008
<>

Bulldog Mini Bypass Pruning Shears BD3150 – Product Review

Review by Michael Smith

The Bulldog BD3150 mini bypass pruning shears are a very nice and handy little pair of pruners for the cutting back of live or 'green' foliage and also capable of basically all small pruning tasks. In my opinion those pruners are also great for children who wish to help in the garden. Yes, I do know that they are cutting tools and sharp but they will never learn how to do things if they are not permitted to learn when young.

The cutting capacity is 6mm which is just under 1/2 inch in old money. However, it is probably possible to cut a little thicker pieces like that. It all depends on what material they are. While I would not suggest to cut a 3/4 inch apple twig or one of other hard wood with this pair of pruning shears it it, however, possible to cut bramble runners of that size and even bigger, especially if they are “green”.

While an ideal little pair of pruning shears for the home and also the allotment gardener they are also suitable for the professional when about generally in case there is something to be that needs dead heading, whether roses or flowering plants in general. In addition it is also an ideal small pair of secateurs for the Park and Countryside Ranger on patrol should the need arise to cut some bramble runners or such clear from a path to protect the public from injury. It is the small size here that comes in at the forefront, allowing it to just be slipped into a pocket or a notebook belt pouch or such.

Those mini bypass pruners are also brilliant for harvesting produce in your veggie garden or plot, whether those be beans or other vegetables, and do a much better job than garden scissors, for instance.

The grip is a soft elastomer kind of material than makes using them a pleasure.

Priced at an RRP of £8.44 they hardly break the bank and as with all Bulldog tools we are talking quality at an affordable price. I know that you can get secateurs for less than £3 or even for as low as 99pence but what are you getting there?

The only one thing that I am not too sure about, I must say, as to reliability and durability, is the yellow – in the case of the green handles version of the BD3150 mini bypass pruning shears that I was given for review – plastic sliding lock. I would have rather seen something like the lock on the BD3152 bypass pruning shears. In use I find that at times that lock slides forward and, in fact, locks the shears. This is, though, not the only kind of lock on secateurs that I have a problem with. The old style, as on the afore mentioned BD3152 – the clasp on the bottom of the handles – still takes a lot of beating. The spring too, maybe, just maybe, could do with, in my opinion, being just a little bit stronger.

However, this small pair of mini pruners is something that many people will have been waiting for, and also those gardeners that want to be able to allow their youngsters a go in the garden with dead heading and such but the secateurs on the market in general are too large to really be able to do that. These mini pruning shears will, certainly, bridge that gap.

© M Smith (Veshengro), September 2008
<>

Bulldog Bypass Pruning Shears BD3152 – Product Review

Rollins Bulldog have been making quality tools for gardening and agriculture for well over 200 years by now and most of those tools are still forged at Bulldog's Clarington Forge in Wigan.

The pair of bypass pruning shears, that I have the pleasure in reviewing here, are from the Premier Range, and came to me via a press pack from the 2008 Garden Press Event that was held at the Royal Horticultural Halls in Westminster at the end of January 2008, are no exception here. They are a quality tool at a very reasonable price. At around GBP 13 these quality pruners certainly are not expensive.

The blades are forget from high carbon SK-5 Japaneses steel and the handles are sold aluminium into which the blades are securely bolted. The handles have green “elastomer” grips, preventing the tool slipping out of your hands.

Locking together of the handles is achieved by an old method though with modern materials, that is to say that an ABS plastic hook acts as the lock at the bottom of the handles, locking the pruners safely and secure.

The spring is of the common “caterpillar” kind which is, unfortunately, often prone to jumping out and getting lost. This problem is overcome, as it would appear, on the BD3152 pruners in that the ends of the spring has been recessed rather deep into the handles and I should think that it is nigh on impossible for the spring to jump out on its own without help.

The BD3152 pruners appear very well made and well thought out, as are all Bulldog tools, and should give years of faithful service at a great value price. The length of service obviously depends greatly on how they are used or abused and treated or mistreated during and especially also after work. This often makes or breaks a tool.

Pros:
High carbon steel blades, forged
Bladed bolted into handles
Solid aluminium handles with rubberized grips
Safe and secure locking mechanism
Value for money price

Cons:
Still trying to find any.

The BD3152 Bypass Pruning Shears from Bulldog are equally well suited, in my opinion, for the professional gardener as well as the allotment gardener or the amateur at home.

© Michael Smith (Veshengro), March 2008

The Storm Kettle – Product Review

Originally, the Storm Kettle was handmade in Ireland - often by travellers who produced them in copper - for fishermen, itinerant workers and tourists. John Grindlay, who with his wife owns and runs the Eydon Kettle Company, modified the design and implemented modern manufacturing techniques in the early 1960’s.

John Grindlay borrowed an original copper kettle and took it to England during the winter. Tooling was manufactured and the first 10 kettles eventually produced. These were very quickly sold for £10 each in 1979, the assembly work being carried out by Mr Grindlay’s children who were then 8 years and 10 years old. Popular demand meant that production had to increase. Since 1979 the numbers sold have substantially increased each year.

Mainly these Kettles, whether sold in the UK, Germany, or elsewhere, are used by sportsmen, holiday makers, expedition organisers and outdoor enthusiasts. They have even accompanied the explorer John Blashford-Snell, while he was searching for signs of early civilisations on a trip to Central America.

Nowadays they can be found in the Solomon Isles helping remote islanders boil water to purify it, in remote parts of Southern Africa, where dried cattle dung is used by the Zulus as fuel, or in the Sahara Desert on expeditions.

I am always amazed though that they never seem to have found a take up by the still travelling Romani in the UK and elsewhere. The Storm Kettle does away with the need for a fire for just the purpose of brewing a cup of tea or coffee or even for the making of some other hot beverage.

Using a Storm Kettle means you can boil water easily, in the wettest and windiest of weather, both rapidly and safely. They are also environmentally friendly as you only need a sheet of newspaper and a handful of twigs as fuel. So the simplicity of the Kettle ensures that boiling water is always available, without the need to use gas, petrol or any other artificial fuel.

Storm Kettles come in two sizes, the Original and the Popular. The Original will boil up to 2.5 pints (approx. 1.5 litres) the Popular up to 2 pints (approx. one litre) – that should ensure more than enough hot water is available for you within minutes - at any time.

The water boils rather quickly and can be kept going by just adding further small sticks into the fire that is going in the burner beneath the kettle via the “chimney”.

One word of warning even though it is mentioned more than once in the literature and also on a sticker on the kettle itself: NEVER EVER use it with the cork in place. While the cork is very handy for carrying the kettle with water in it when heating the water the cork must be taken out of the spout.

The Storm Kettle & the cook set that nowadays is available for it is the ideal kit for forestry workers, countryside conservators, and other such like, such as Parks & Countryside Ranger, especially those working on maintenance tasks away from the main base.

While the Storm Kettle and accessories do not come cheap I can but recommend them.

The Prices for the kettles are: £43.00 for the Popular and £44.50 for the Original. Prices include V.A.T. and carriage.

Reviewed by Michael Smith (Veshengro), February 2008